| Compressed
Air Amplifiers: |
 |
Adjustable
Compressed Air Amplifiers |
Adjustable
Compressed Air
Amplifiers : anodized aluminum
or stainless steel for high temperature
or food applications. The customer
can set the gap and lock it in place
using a lock ring. |
 |
Fixed
Compressed Air Amplifiers |
Fixed
Compressed Air
Amplifiers : zinc die cast Standard
Compressed Air
Amplfiers from Nex Flow™
are solid and perform as well or better
than patented designs when used in
similar applications. The gap
can be adjusted by adding shims, five
sizes are available. |
 |
| Air
Knives / Air
Knife : |
 |
Standard
Air Blade™ (Air Knives, Air Knife) |
Air
Consumption approx. 3.4 SCFM (82 SLPM)
per inch (25.4 mm) at 80 psig (5.5
bar) with force and noise levels comparable
to standard air
knives of all types. |
 |
X-STREAM™
Air Blade (Air Knives, Air Knife) |
The
X-Steam™ Air
Blade air
knife is normally the best choice
due to very low noise levels and it
uses less air than a standard air
blade air
knife at the same pressure.
However the standard unit is lower
in cost and has a slightly higher
force at the same pressure. Either
version may be mounted end to end
for longer lengths of continuous
flow. |
 |
Curved
Air Blade (Air Knives, Air Knife) |
The
new X-stream™ Curved Air
Blade air
knife is easy to mount and maintain
and reduces both compressed air consumption
and noise levels. It’s curved
design produces an expanding, powerful
blast of air in a fan shape to blow
off wide areas and can minimize air
use using longer air
knives. |
| Air
Nozzles and Jets : |
|
 |
Compressed
Air Nozzles |
|
|
 |
Compressed
Air Jets |
Air
jets entrain large volumes of
surrounding air through the jet (similar
to air
amplifiers) and are more efficient
than air
nozzles. They cover a larger
blow-off target than a nozzle.
|
| Vortex
Tube Technology and Spot Cooling
: |
|
 |
Standard
Vortex Tube |
|
Vortex
tubes two sizes with a wide range
of cooling capacity and temperature
range.
|
 |
Adjustable
Spot Cooler |
|
Complete
with a swivel base with magnetic attachment.
Applications are where adjustability
is required. All Nex Flow™
adjustable spot coolers are stainless
steel for long life.
|
| Panel
Cooler / Cooling : |
 |
Panel
Cooler / Cooling |
|
Cool
and purge clean electrical and electronic
control panels with no refrigerant,
and virtually no maintenance. Eliminate
over heating , humidity and dirt.
|
| Tool
Coolers : |
|
 |
Tool
Cooler |
|
Ideal
for dry machining applications and
to replace environmentally unfriendly
mist . Can extend tool life and
speed up dry machining operations.
|
|
| Air
Wipes : |
|
 |
Ring-Blade™
Air Wipe |
Air
Wipe Blow-Off System - Ring-Blade™
from Nex Flow™ is easy to mount
and maintain and reduces both compressed
air consumption and noise levels.
|
|
| Compressed
Air Operated Conveyors : |
 |
Compressed
Air Conveyors - Ring-Vac™ Compressed
Air Conveying System |
Air
Conveyors - Ring-Vac™ Pneumatic
Conveying System has virtually no
moving parts, convey's air at high
rates and long distances. Utilizing
compressed air for a powerful, efficient
venturi action along its length in
a compact design for high capacity
conveying over large distances.
|
|
| Industrial
Housekeeping : |
|
 |
Reversible
Drum Angel |
|
Reversible
Drum Angel (2-way reversible drum
pump) is a system to fill or empty
a drum in under 90 seconds. It
is perfect for coolant sumps, general
cleanup, and spill recovery.
|
 |
X-STREAM™
Hand Vac |
|
X-Stream
hand vac is a blow-off gun, and vacuum
gun, and a transfer system in one
package. It is used for vacuuming,
the transfer of small parts, and cleanup
up of chips, sawdust, coolant, etc. This
low cost unit is an ideal package
for maintenance.
|
 |
Spray
Booth Dry Air Gun |
|
Spray
Booth Dry Air Gun: is a hand held
air amplification system c/w screen
to prevent dirt from being blown onto
the spray booth wall to speed the
cooling and drying of paint.
|
